Moin,
ich wollte gestern den aktuel...
Moin,
ich wollte gestern den aktuellen Mozilla emergen. Dabei habe ich zwei Pakete gefunden, eben Mozilla und dann noch Mozilla-bin. Beide in Version 1.7.3 (x86), aber unterschiedlich groß. Ich glaube 12MB gegenüber 29MB.
Was ist prinzipiell der Unterschied zwischen diesen Paketen?
Habe bisher keinen Anhaltspunkt finden können...
happy gentooing, pir187!
_________________
Linux 2.6.24-gentoo-r8, Athlon XP 3200+@ASUS A7N8X-E Deluxe 2.0, 2GB MDT DDR-RAM PC3200@2,5-3-3-7, Gainward GF7800GS+ (G71), Creative Audigy 2 ZS, 2x Seagate 750 GB@RAID1 + LVM2
(sehr zufriedener) registrierter Linux-Nutzer #360788
Hi,
I want a way to logon to my Gen...
Hi,
I want a way to logon to my Gentoo Linux box and do some work on it... I am trying to a avoid VNC because someone might beon the termianl as well... So exceed sounds to be the way to go, if it fail then I will see how to setup VNC for remote control.
If exceed, can anyone tell me what I need to do to setup exceed? I went to Xclient start and I put the IP and user info but I didn't know what to put in the command... Also, do I need anything setup in Linux xrog for this?
Thanks...
I just got Gentoo installed on my 2nd computer yes...
I just got Gentoo installed on my 2nd computer yesterday, a Shuttle SS51G. The install went without a hitch and everything was working great, until I rebooted for the first time. When it booted and Gentoo started loading the daemons, I noticed that the hard drive would pause for about 5 seconds, drive LED on, but no actvity. I thought this was just a glitch and proceeded on. I started to emerge my packages, but found that when there was disk activity, the hard drive would do this pause, continue, pause thing, alternating every 5 seconds. I used the gentoo-sources to build my kernel, so I decided to use a plain vanilla source, with no extra drivers built in to avoid problems. Unfortunately, I still get the same problem. The hard drive will start accessing, then an audible click noise, then it pauses for 5 seconds, then it continues, clicks, pauses... etc. I would normall just say the hard drive is failing or is bad, but I reformatted to check to see if WinXP does the same thing, and it DOESNT. As a matter of fact XP runs great with hardly any noise from the hard drive at all. So, this seems like a Gentoo problem or Linux problem. Anybody know what's going on here?
Hallo zusammen,
wollte mal fragen, ...
Hallo zusammen,
wollte mal fragen, ob mir mal einer von euch ne saubere xorg.conf zukommen lassen kann. Ich bekomme es einfach nicht hin, meine nvidia gforce4 4800 TX zum laufen zu bekommen.
Ich habe alles so gemacht, wie es in der Anleitung steht. Habe in der xorg.conf den Treiber auf nvidia gestellt, habe die Option für glx dort auch aktiviert, dri habe ich auskommentiert.
Aber wenn ich die xorg.conf so abgeändert habe, dann startet X nicht richtig. Habe einen Schwarzen Bildschirm, ne ganze Zeit lang, und wenn ich dann igendwie ein paar tasten Drücke, dann bekomme ich ein weißes Bild mit irgendwas drauf, was ziemlich verschwommen aussieht. Ich kann dann aber auch nicht auf die Konsole zurückswitchen. Es geht quasi gar nichts mehr, dort hilft nur noch der reboot per ssh.
Habe den nvidia-kernel und nvidia-glx installiert, das Modul wird auch geladen. opengl-update nvidia habe ich auch gemacht, aber nichts klappt.
Hat jemand ein ähnliches Problem gehabt, und kann mir erklären, was ich machen kann?
Kann mir mal jemand seine xorg.conf posten?
Kann es vielleicht sein, das ich xorg danach nochmal neu kompilieren müsste, damit er mit nvidia funzt?
Würde ja gerne meinen Rechner noch produktiver Einsetzen, aber manchmal bracuht man halt ein bissel 3D 
zum zocken. Will das auch unter Linux machen, aber Karte funzt zur Zeit nur unter Windows, und auf Windows habe ich kein Bock mehr.
Schönen Dank schonmal
Der DeEJaY
_________________
I've just did an emerge rsync succesfully,
...
I've just did an emerge rsync succesfully,
now i have to do this:
<quote>
Now that you have a working copy of the Portage tree, people using stage1 to
install will need to bootstrap their Gentoo Linux system as follows. First edit
the file /etc/make.conf. In this file, you should set your USE flags, which
specify optional functionality that you would like to be built into packages;
generally, the defaults (an empty or unset USE variable) are fine. You also
should set appropriate CHOST, CFLAGS and CXXFLAGS settings for the kind of
system that you are creating (commented examples can be found further down in
the file.) If necessary, you can also set proxy information here if you are
behind a firewall.
Code listing 18
# nano -w /etc/make.conf (Adjust these settings)
</quote>
I have a Pentium 200 MMX, do I need to make any changes to the make.conf file?
This is my second attempt, last time my system kept rebooting after fully
installng, last time I uncommented
these lines:
chost ="586-pc-linux-gnu"
cflags="-march=i586 -03 -pipe"
cxxflags="-march=i586 -03 -pipe"
I think I forgot to set the USE variable the last time.
Is this correct?
USE="CHOST CFLAGS CXXFLAGS"
Works for Linux too.
Works for Linux too.
http://biosdriver.net/?id=13412&comp=ZyXEL&model=P-660R-T1%20v2%20Firmware%203.40(AGJ.2)C0
I am getting sooo tired of I am getting sooo tired of unison now.
Since the last upgrade to 2.13.16 I've only had trouble with it. (and it's GTK... EWWWWW!!!)
Does anyone know of a competent alternative?
When I started using unison I was thinking, "OK, that will do for now", because I would really prefer a server mode thing instead, like a replicating file server, mirroring everything in the directories involved so I wouldn't have to be connected to use the files, neither start any synchronising by hand.
My usage case is:
I need to be able to use openoffice with our samba file server at the office. I can browse the otherwise excellent smb:/ ioslave with konqueror, but it doesn't work to just doubleclick to open a file. Sadly.
Another downside to samba is of course I need to be connected, which is a problem when I am somewhere else and need the files.
So I really need to access the files like they were local (I know I can mount a samba share on the unix filesystem, but I don't like it), and I would love to be able to have a automatically synchronized replica on my laptop, for offline use.
Unison sufficed for the past year or so, but now it only makes me upset.
Is there any replacement fitting my requirements?
Gentoo Linux Security Advisory
Titl...
Since the last upgrade to 2.13.16 I've only had trouble with it. (and it's GTK... EWWWWW!!!)
Does anyone know of a competent alternative?
When I started using unison I was thinking, "OK, that will do for now", because I would really prefer a server mode thing instead, like a replicating file server, mirroring everything in the directories involved so I wouldn't have to be connected to use the files, neither start any synchronising by hand.
My usage case is:
I need to be able to use openoffice with our samba file server at the office. I can browse the otherwise excellent smb:/ ioslave with konqueror, but it doesn't work to just doubleclick to open a file. Sadly.
Another downside to samba is of course I need to be connected, which is a problem when I am somewhere else and need the files.
So I really need to access the files like they were local (I know I can mount a samba share on the unix filesystem, but I don't like it), and I would love to be able to have a automatically synchronized replica on my laptop, for offline use.
Unison sufficed for the past year or so, but now it only makes me upset.
Is there any replacement fitting my requirements?
Gentoo Linux Security Advisory
Titl...
Gentoo Linux Security Advisory
Title: ClamAV: Multiple vulnerabilities
Hi. I'm thinking about installing Vida Linux OS. H...
Hi. I'm thinking about installing Vida Linux OS. Have any of you used this OS and could compare to Gentoo and other distros (ATM I'm using Fedora Core 4)? Is it worth using or if I'm thinking about smth emerge-oriented I should rather use Gentoo ?
Thx for help
Theriel
Ciao a tutti, sto facendo alcune prove di installa...
Ciao a tutti, sto facendo alcune prove di installazione (per il momento sul notebook) e leggendo dalla lista delle Use flag disponibili, ho tirato fuori quelle che a mio avviso vanno bene per me.
Calcolando che:
1. Ho un ADM Athlon 64
2. Scheda video nVidia
3. Periferiche esterne usb
4. Masterizzatore e lettore DVD
5. Uso generalmente KDE, openoffice, kino, foobillard, avidemux2, ascolto musica, guardo filmati divix-xvid-mpg ecc.
Potrebbe andare bene una flag use di questo tipo:
USE="X alsa apm arts audiofile avi bash-completion bluetooth cdr cups dbase dio divx4linux doc dv dvd dvdr dvdread encode fastcgi fbcon ffmpeg foomaitcdb ftp gphoto2 java javascript jpeg kde lm_sensors mad maildir mikmod mmx mp3 mpeg ogg oggvorbis opengl pdflib perl png qt quicktime samba scanner socketssse tiff truetype usbv4l vcd videos wmf xine xinerama xml xml2 xmms xpm xprint xvid amd64 -gtk -gtk2 -gnome"
Siccome mi sembra una stringa un po' lunghina rispetto a quelle che vedo di solito, non sono sicuro che sia una buona idea mettere un flag use così complicato 
Voi cosa mi consigliate?
Grazie.
[/list]
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82